Hkey_local_machine drivers builtin wlan

 · [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\USBOTG] "CableDetectPol" = dword:0x ;default 1. On the Module we only have one pin to detect the host/client status. Default is, that we detect the 5V connected to a USB client(B) connector (CableDetectPol=1). The alternative configuration is to detect an ID pin pulled to GND Missing: wlan.  · Use this: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WLAN] ; ; D0 - Full on ; D4 - Off ; ; InitialState is a dword represent CEDEVICE_POWER_STATE, valid values ; are: 0 - D0, 4 - D4. ; "InitialState"=dword:4 ; D4, changed default to OFF, product team to override if needed. Steps: 1. Create a registry file with content below: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WLAN] "InitialState"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WCSRV] "InitialState"=dword Note that: dword:4 = WLAN off. dword:0 = WLAN on. 2. Save and place this registry file in device \Application .

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WLAN] "InitialState"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WCSRV] "InitialState"=dword:0 Note that: dword:4 = WLAN off. dword:0 = WLAN on. 2. Save and place this registry file in device \Application partition. 3. After executing the registry, warm boot the device to take effect. You said "Make sure you are not loading the driver at boot time by not mentioning it in the bib file.", but did you really mean REG? I suspect that the OP wants the driver to be in the OS. Of course you could leave the driver in the OS (bib file) and the Reg, but move it out of HKLM\Drivers\Builtin as you show in the call to ActivateDeviceEx. The following trees in the registry are of particular interest to driver writers (where HKLM represents HKEY_LOCAL_MACHINE): HKLM\SYSTEM\CurrentControlSet\Services Registry Tree. HKLM\SYSTEM\CurrentControlSet\Control Registry Tree. HKLM\SYSTEM\CurrentControlSet\Enum Registry Tree. HKLM\SYSTEM\CurrentControlSet\HardwareProfiles Registry Tree.

REGEDIT4 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ZeroConfig] "Flags"=dword [HKEY_LOCAL_MACHINE\Services\DSASVC] "Flags"=dword Environment: VS C#.NET CF I develop a application which lists the active device found on the mobile. the option to manually configure the wireless network. HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CSPIn, in the www.doorway.ru file and look for the Index.