Driver airbag squib

 · A short video on how to bypass the "Driver squib 1st circuit; open circuit". Do not recommend this "fix" as a permanent fix. The airbag slip ring MUST be r. Safety Recall S92 – Driver Airbag Inflator Page 7 6. Disconnect the two driver airbag squib connectors. Depress the latches on each side of the connector insulator and pull the insulators straight out from the driver airbag inflator to disconnect them from the connector receptacles (Figure 3). 7. Remove the driver airbag from the steering.  · Learn what Driver Airbag Squib 1 Circuit Open means, location and how to repair? When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and www.doorway.ruted Reading Time: 3 mins.

A short video on how to bypass the "Driver squib 1st circuit; open circuit". Do not recommend this "fix" as a permanent fix. The airbag slip ring MUST be r. The horn honked itself, but wouldn’t honk when I tried. The hazard lights were acting up. And the air bag light was on. A faulty squib was the cause for all of the above. The Clock Spring (aka: Squib) provides electrical connections for various circuits within the steering wheel while allowing the wheel to turn. “The British call it a Squib. Safety Recall S92 – Driver Airbag Inflator Page 7 6. Disconnect the two driver airbag squib connectors. Depress the latches on each side of the connector insulator and pull the insulators straight out from the driver airbag inflator to disconnect them from the connector receptacles (Figure 3). 7. Remove the driver airbag from the steering.

The air bag controller looks for a certain value resistance (of the fuse) to sense the presence of a good air bag. So if bad connection, or. Hey, I have an airbag light on the dash. When reading it i get driver airbag squib low resistance. I have checked the connections under the. B1BDriver Airbag squib 1 circuit open, The Occupant Restraint Controller (ORC or Airbag Module) monitors the resistance of the Driver.